42 tbm multianode tantalum ultra low esr cots-plus weibull grade & space level tbm cots-plus series uses an internal multi-anode design to achieve ultra-low esr which improves performance in high ripple power applications. tbm is available with weibull grade b reliability and all mil-prf-55365 surge test options (a, b & c). there are four termination finishes available: solder plated, fused solder plated, hot solder dipped and gold plat- ed (these correspond to h, k, c and b termination, respectively, per mil-prf-55365). the molding compound has been selected to meet the requirements of ul94v-0 (flame retardancy) and outgassing requirements of nasa sp-r-0022a. this product is considered msl 3 in accordance with j-std-020. l s aaw 1 w h code l0.20 w+0.20 (0.008) h+0.20 (0.008) w 1 0.20 a+0.30 (0.012) s min. (0.008) C0.10 (0.004) C0.10 (0.004) (0.008) C0.20 (0.008) d 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) e 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) w 1 dimension applies to the termination width for a dimensional area only. case dimensions: millimeters (inches) capacitance rated voltage dc (v r ) to 85c f code 2.5v (e) 4v (g) 6v (j) 10v (a) 12v (b) 16v (c) 20v (d) 25v (e) 35v (v) 10 106 15 156 22 226 d(70) e(60,100) 33 336 d(65) e(50,65) 47 476 e(65) 68 686 100 107 e(35,45) 150 157 e(30,40) 220 227 d(35) e* 330 337 d(35) d(35) e(35) e* 470 477 d(35) e(30) 680 687 e(23) 1000 108 d(25) e(23) 1500 158 e(18) capacitance and rated voltage range letter denotes case size esr limit in brackets tbm d multianode construction tbm e multianode construction available ratings: esr limits quoted in brackets (ohms) engineering samples - please contact manufacturer *codes under development - subject to change. notes: voltage ratings are minimum values. avx reserves the right to supply higher ratings in the same case size, to the same reliability standards. eia standards for low esr solid tantalum capacitors allow an esr movement of 1.25 times initial limit post mounting.
43 tbm multianode tantalum ultra low esr cots-plus weibull grade & space level space level options to src9000*: * capacitance tolerance m = 20% k = 10% packaging b = bulk r = 7" t&r s = 13" t&r w = waffle see page 6 for additional packaging options. ++ surge test option 00 = none 23 = 10 cycles, +25oc 24 = 10 cycles, -55oc & +85oc 45 = 10 cycles, -55oc & +85oc before weibull tbm type tbm type e case size l standard or low esr range c = std esr l = low esr # inspection level s = std. conformance l = group a d = dscc dwg (pending) how to order cots-plus: 006 voltage code 002 = 2.5vdc 004 = 4vdc 006 = 6vdc 010 = 10vdc 016 = 16vdc 020 = 20vdc 025 = 25vdc 035 = 35vdc 477 capacitance code pf code: 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) @ reliability grade weibull: b = 0.1%/1000 hrs. 90% conf. c = 0.01%/1000 hrs. 90% conf. z = non-er ^ termination finish h = solder plated 0 = fused solder plated 8 = hot solder dipped 9 = gold plated 7 = matte sn (cots-plus only) 9 = src9000 * capacitance tolerance m = 20% k = 10% packaging b = bulk r = 7" t&r s = 13" t&r w = waffle see page 6 for additional packaging options. ++ surge test option 45 = 10 cycles, -55oc & +85oc before weibull e case size l standard or low esr range c = std esr l = low esr l inspection level l = group a 006 voltage code 002 = 2.5vdc 004 = 4vdc 006 = 6vdc 010 = 10vdc 016 = 16vdc 020 = 20vdc 025 = 25vdc 035 = 35vdc 477 capacitance code pf code: 1st two digits represent significant figures 3rd digit represents multiplier (number of zeros to follow) @ reliability grade weibull: c = 0.01%/1000 hrs. 90% conf. 9 qualification level 9 = src9000 ^ termination finish h = solder plated 0 = fused solder plated 8 = hot solder dipped 9 = gold plated *check with factory for availability technical data: unless otherwise specified, all technical data relate to an ambient temperature of +25c capacitance range: 22 f to 1500 f capacitance tolerance: 10%; 20% rated voltage dc (v r ) +85c: 2.5 4 6 10 16 20 25 35 category voltage (v c ) +125c: 1.7 2.7 4 7 10 13 17 23 surge voltage (v s ) +85c: 3.3 5.2 8 13 20 26 32 46 +125c: 2.2 3.4 5 8 12 16 20 28 temperature range: -55c to +125c technical specifications 0 qualification level 0 = n/a not rohs compliant not rohs compliant lead-free compati- ble component for rohs compliant products, please select correct termination style.
44 tbm multianode tantalum ultra low esr cots-plus weibull grade & space level all technical data relates to an ambient temperature of +25c. capacitance and df are measured at 120hz, 0.5v rms with a maximum dc bias of 2.2 volts. dcl is measured at rated voltage after 5 minutes. note: avx reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. parametric speci?cations by rating typical ripple data by rating cap dc rated esr @ dcl max df max power 25oc 85oc 125oc 25oc 85oc 125oc @ 120hz voltage 100khz +25c +85c +125c +25c +(85/125)c -55c dissipation ripple ripple ripple ripple ripple ripple avx p/n case f @ v @ mohms (a) (a) (a) (%) (%) (%) w aaavvv 25oc +85oc @ +25oc (100khz) (100khz) (100khz) (100khz) (100khz) (100khz) 2.5 volt @ 85oc (1.7 volt @ 125oc) tbmd108*002l sb0^++ d 1000 2.5 25 18.8 188 376 8 11 12 0.255 3.194 2.874 1.277 0.080 0.072 0.032 tbme158*002l sb0^++ e 1500 2.5 18 28.1 281 562 6 9 10 0.270 3.873 3.486 1.549 0.070 0.063 0.028 4 volt @ 85oc (2.7 volt @ 125oc) tbmd337*004l sb0^++ d 330 4 35 9.9 99 198 8 11 12 0.255 2.699 2.429 1.080 0.094 0.085 0.038 tbmd477*004l sb0^++ d 470 4 35 14.1 141 282 8 11 12 0.255 2.699 2.429 1.080 0.094 0.085 0.038 tbme687*004l sb0^++ e 680 4 23 20.4 204 408 6 9 10 0.270 3.426 3.084 1.370 0.079 0.071 0.032 tbme108*004l sb0^++ e 1000 4 23 30 300 600 6 9 10 0.270 3.426 3.084 1.370 0.079 0.071 0.032 6 volt @ 85oc (4 volt @ 125oc) tbmd337*006l sb0^++ d 330 6 35 14.9 149 298 8 11 12 0.255 2.699 2.429 1.080 0.094 0.085 0.038 tbme477*006l sb0^++ e 470 6 30 21.2 212 424 6 9 10 0.270 3.000 2.700 1.200 0.090 0.081 0.036 10 volt @ 85oc (7 volt @ 125oc) tbmd227*010l sb0^++ d 220 10 35 16.5 165 330 8 11 12 0.255 2.699 2.429 1.080 0.094 0.085 0.038 tbme337*010l sb0^++ e 330 10 35 24.8 248 496 6 9 10 0.270 2.777 2.500 1.111 0.097 0.087 0.039 16 volt @ 85oc (10 volt @ 125oc) tbme157*016l sb0^++ e 150 16 30 18 180 360 6 9 10 0.270 3.000 2.700 1.200 0.090 0.081 0.036 tbme157*016c sb0^++ e 150 16 40 18 180 360 6 9 10 0.270 2.598 2.338 1.039 0.104 0.094 0.042 20 volt @ 85oc (13 volt @ 125oc) tbme107*020l sb0^++ e 100 20 35 15 150 300 6 9 10 0.270 2.777 2.500 1.111 0.097 0.087 0.039 tbme107*020c sb0^++ e 100 20 45 15 150 300 6 9 10 0.270 2.449 2.205 0.980 0.110 0.099 0.044 25 volt @ 85oc (17 volt @ 125oc) tbmd336*025l sb0^++ d 33 25 65 6.2 62 124 8 11 12 0.255 1.981 1.783 0.792 0.129 0.116 0.051 tbme476*025l sb0^++ e 47 25 65 8.8 88 176 6 9 10 0.270 2.038 1.834 0.815 0.132 0.119 0.053 35 volt @ 85oc (23 volt @ 125oc) tbmd226*035l sb0^++ d 22 35 70 5.8 58 116 8 11 12 0.255 1.909 1.718 0.763 0.134 0.120 0.053 tbme226*035l sb0^++ e 22 35 60 5.8 58 116 6 9 10 0.270 2.121 1.909 0.849 0.127 0.115 0.051 tbme226*035c sb0^++ e 22 35 100 5.8 58 116 6 9 10 0.270 1.643 1.479 0.657 0.164 0.148 0.066 tbme336*035l sb0^++ e 33 35 50 8.7 87 174 6 9 10 0.270 2.324 2.091 0.930 0.116 0.105 0.046 tbme336*035c sb0^++ e 33 35 65 8.7 87 174 6 9 10 0.270 2.038 1.834 0.815 0.132 0.119 0.053 rating & part number refer ence
|
